Feature:
| Num. | Parameter | Parameter value |
| 1 | Product number | DL-LN33 |
| 2 | Chip selection | CC2530 |
| 3 | Working frequency | 2400~2450MHz (16 channels total) |
| 4 | Communication Interface | UART serial port (supports 13 baud rates, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 125000, 250000, 500000) |
| 5 | Self-organizing network hops | <=15 jump |
| 6 | Single hop transmission distance | 70 meters (out of the air, no occlusion test) |
| 7 | Number of points that can be accommodated | The typical value is 190. When the network tends to be dense, the number of nodes decreases, and the minimum value is 96. |
| 8 | MAX packet length | 63Byte (including port address information) |
| 9 | Transmission capacity | The transmission rate is higher when only one node sends data: Because the routing information of the transmitted packet occupies a certain bandwidth, the longer the length of each packet, the higher the transmission efficiency. 2400 Bit/s when each package contains 3 bytes of data. 10KBit/s when each package contains 30 bytes of data. |
| 13 | MAX send rate | 250KBit/s |
| 14 | Packet retransmission times | Up to 15 times, at least 5 times when the network load is high |
| 15 | Air delay | Single-hop between nodes, less than 10mS |
| 16 | Transmit power | 4. 5dBm |
| 17 | Operating Voltage | 2. 5V~3. 6V |
| 18 | Working current | Less than 30mA |
| 19 | Antenna interface | PCB antenna |
Pin Descriptions:
| Pin name | Pin position | Significance |
| NoUsed | 1, 2,10,11,13 | Not used, please keep it empty (empty refers to not connected to any circuit) |
| TestMode | 3 | Test mode, when working in normal mode in empty, grounding works in test mode. Please use it empty when the user is using it. |
| TestTx | 4 | Enter test information in test mode, which will be output as a controllable IO port when the user uses it. |
| TestRx | 5 | Enter test information in test mode, which will be output as a controllable IO port when the user uses it. |
| Gnd | 6, 9,16 | Ground |
| Vcc | 7,8 | Power supply |
| BaudReset | 12 | If this pin is grounded first and then the module is started, the module will force a 115200 default baud rate to operate. In this mode, the baud rate of the module can be read or set. The baud rate read is the baud rate previously set by the module, not 115200. If the baud rate setting is not performed, the module will be restarted again. Work with the previously set baud rate. |
| Tx | 14 | Uart output of the module |
| Rx | 15 | Uart input of the module |
Package includes:
3 x Wireless Networking Board
Fast Shipping and Professional Packing
We offer a wide range of shipping options owing to our long-standing relationships with UPS, FedEx and DHL. Our warehouse personnel will pack all goods to our exacting specifications. Your goods will go through a thorough inspection and be securely secured prior to being shipped. Every day, we deliver to thousands of customers across many countries. This shows our commitment to become the biggest online retailer on earth. Warehouses and distribution centers can be found in Europe and the USA.
Orders that contain more than one item are assigned processing times in accordance with the item.
Prior to shipping, we check the item thoroughly before sending the items. The majority of orders will be delivered within 48 hours. Delivery time ranges between 3-7 days.
Returns
The inventory is always changing and we do not completely manage it because several parties are involved, including our warehouse and factory. The actual stock levels can fluctuate at any point. Please understand it may happen that your order is out of stock after the order has been placed.
Our policy is valid for 30 days. However, if the 30 days have elapsed after you bought your product, we are unable to provide a refund or exchange.
You can only return an item if it is unused and is in the same condition the day you received it. It must also be in its original packaging.
Related products
Module Board
(Wifi Car Dedicated) NodeMcu Lua ESP8266 ESP-12E + WiFi Motor Drive Expansion Board Yuup-NS
Electronic Components & Supplies
0.1MHz-1.7GHz TCXO Temperature SDR All-Band Software Receiver For Windows XP/7/8/10 yuup.co.za
Electronic Components & Supplies
Electronic Components & Supplies
1.2W 6V Mini Portable Polycrystalline Solar Panel with Plastic Frame + 5521 DC Interface Cable Yuup
Electronic Components & Supplies
1 Pair 10 inch Gold Universal Opener with Base Aluminium NAB Hub Adapter for Studer ReVox Yuup
Electronic Components & Supplies
Electronic Components & Supplies
1 Pair 4 Ohm 3W LCD Panel Speaker Amplifier Audio Frequency Output For V29 / V56 / V59 Yuup
Electronic Components & Supplies
0.05-4GHz Ultra-low Noise NF=0.6dB High Linearity Broadband Amplifier LNA Input -110dBm Yuup
Electronic Components & Supplies
1 Pair of Gold/Silver Aluminum Alloy Both Side Plate forT200/TP200/T600 Tank Chassis Car Yuup
Electronic Components & Supplies
1 Pair 10 inch Blue Universal Opener with Base Aluminium NAB Hub Adapter for Studer ReVox Yuup
Module Board
Motherboard & Development Board
Electronic Components & Supplies
Electronic Components & Supplies
1-63A High Precision Intelligent Over Under Voltage Over-current Protector Yuup
Electronic Components & Supplies
1 Pair 10 inch Black Universal Opener Aluminium NAB Hub Adapter for Studer ReVox Yuup
Electronic Components & Supplies
Electronic Components & Supplies
1 Channel Relay Module 30A with Optocoupler Isolation 5V Supports High and Low Trigger Yuup
Electronic Components & Supplies
Electronic Components & Supplies
1.5 GHz-9 GHz Omnidirectional Antenna SMA Female UWB Antenna UWB Antenna Yuup
Electronic Components & Supplies
Module Board
01Studio 3.3V Relay Module Pyboard MicroPython Programming Learning Development Board Yuup-S
Electronic Components & Supplies
Module Board
Electronic Components & Supplies
Electronic Components & Supplies
Electronic Components & Supplies
Electronic Components & Supplies
01Space STM32F411CEU6 9DOF Development Board ICM42688P QMC5883L SPL06-001 Board yuup.co.za