Sale!

visitourwebsitetoviewthemostrecent5pcs220vxhw3002microdigitalthermostathighprecisiontemperaturecontrolswitchheatingandcoolingaccuracy01yuupcozauniquedesignsyoullonly0.jpg

5pcs 220V XH-W3002 Micro Digital Thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1 yuup.co.za

Original price was: $ 509,00.Current price is: $ 152,70.

SKU: us_8082281889966 Category: Electronic Components & Supplies Tags: Electronic Components & Supplies, Module Board, Sensor & Detector Module

Description
shopping

Feature:

Product Name: Microcomputer Temperature Controller

Product model: XH-W3002

Temperature range: -50~110°C

Temperature control range: -50~110°C

Temperature measurement accuracy: +-0.2 °C

Temperature control accuracy: +-0.1 °C

Temperature probe: NTC10K (B3950) 1 meter waterproof probe

Supply voltage: DC12V/DC24V/AC220V

Output power: AC220V: 1500W

Output type: direct output

Appearance size: 60 x 45 x 31mm

Opening size: 73mm (aperture 4mm)

Package includes:

5 x Microcomputer Temperature Controller

Wiring:

Key Description:

Up key: Short press to display the starting temperature, long press to set the starting temperature.

Down button: short press to display the stop temperature, long press to set the stop temperature.

Shutdown button: Press to turn off the thermostat, and then press to turn on the thermostat.

Code	Code description	Setting range	Factory setting
P0	Starting temperature	-50~110°C	25
P1	Stop temperature	-50~110°C	40
P2	Temperature correction	-10~10°C	0°C
P3	Delayed start	0-10 minutes	0

P0. Set the startup temperature:

Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.

P1. Set the stop temperature:

Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.

P2. Set the temperature correction:

In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note: In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)

P3. Set the delay start:

In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note: Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.

Instructions:

Start temperature

Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)

1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)

2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.

3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.

4. Restore the factory: Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.

5. Press the power off button to turn off the thermostat and press to turn on the thermostat.

Tips:

888: In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.

LLL: Describe the sensor is open circuit, repair the sensor, or replace the sensor

HHH: The sensor is short circuit.

Fast Shipping and Professional Packing

We offer a wide range of shipping options owing to our long-standing relationships with UPS, FedEx and DHL. Our warehouse personnel will pack all goods to our exacting specifications. Your goods will go through a thorough inspection and be securely secured prior to being shipped. Every day, we deliver to thousands of customers across many countries. This shows our commitment to become the biggest online retailer on earth. Warehouses and distribution centers can be found in Europe and the USA.

Orders that contain more than one item are assigned processing times in accordance with the item.

Prior to shipping, we check the item thoroughly before sending the items. The majority of orders will be delivered within 48 hours. Delivery time ranges between 3-7 days.

Returns

The inventory is always changing and we do not completely manage it because several parties are involved, including our warehouse and factory. The actual stock levels can fluctuate at any point. Please understand it may happen that your order is out of stock after the order has been placed.

Our policy is valid for 30 days. However, if the 30 days have elapsed after you bought your product, we are unable to provide a refund or exchange.

You can only return an item if it is unused and is in the same condition the day you received it. It must also be in its original packaging.

5pcs 220V XH-W3002 Micro Digital Thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1 yuup.co.za

Related products

Login