10 Keys Wireless Car Steering Wheel Control Button for Car Radio DVD GPS Multimedia Navigation Head Unit Remote Controller Yuup

Specification:

Product Name	CAR Smart Steering Wheel Controller
Product color	Black
Number of keys	Ten keys
Product size	35mm×8mm
Applicable models	It can be used for most models without buttons
Product model	T-3
Product list	2 square controllers, signal receiving box, 3M glue, manual, etc.

 

Signal Receiver Box Wiring Instructions

Red connected to ACC power supply 12V+
Black connected to ground wire
Gray connected to steering wheel control line 1 KEY1
White connected to steering wheel control line 2 KEY2

 

Shopping Notes

01 | Precautions

Please confirm whether the DVD navigation can install this product before installation

02 | Installation conditions

1. There is a steering wheel setting function in the setting interface of the navigation all-in-one machine

2. The tail line label of the navigation all-in-one machine can find the corresponding square control line label. Usually marked as square control 1, square control 2, square control line, square control A, square control B, SW1, SW2, AD1/AD2, square control grounding and so on.

03 | Study Skills

A. Find the corresponding wiring of the DVD navigation host when the power is off, and connect one by one according to the wiring instructions of the decoding box.

B. Enter the navigation control setting interface to learn accordingly.

C. Press and hold the corresponding button on the square controller first, and then tap it on the navigation steering wheel learning interface. After the display shows that the learning is successful, you can easily press the button on the square controller. After learning the functions of the 5 buttons, power off the decoding box, power on, and then Carry out the learning of the next group of 5 keys in the same way.

 

Package Included:

2 X Steering Wheel Controllers

1 X Signal Receiving Box

1 X 3M Glue

1 X Manual